Command the entire room from your fingertips

When combining 10’’ of screen real-estate with an intuitive interface you get quick and easy access to all of your AV equipment. The large size makes it immediately recognizable when entering the room and is designed for convenient placement on you conference table, as well as a great fit for wall mounting.

A strong system powers the experience

TanGo is our most powerful touch panel controller enabling you to gather all of your AV equipment into one single hub.

Easy day to day use of complex rooms or lecture

This bundle makes presenting easy even in well-equipped rooms or lecture halls with window blinds, screens, lights, audio etc.

Easy installation

Connected via PoE (Power over Ethernet) ensures fast and easy installation, either on wall or with the Neets table stand.

Choose variant

  • Neets 10" Touch Panel
    The large size of the 10” touch panel allows for more functions and more devices to be connected.
    Fits standard 1-gang DK, EU or US back box. Wall bracket included. Can also be mounted on a table stand (bought as an accessory). Power the Touch Panel with a compliant PoE power supply (PoE injector not included).
  • Neets Control - TanGo
    Has 3 Bi-directional RS-232 port or IR ports used to control projectors, displays, amplifiers & other AV devices with feedback functionality
    2 Uni-directional RS-232 or IR ports used to send commands to projectors or other AV devices using serial or infrared communication
    8 General Purpose I/O ports used for input/output control of relays, switches and sensors
    4 Built-in low-voltage relays used for controlling external devices as electrical screens
    Ethernet port used to control 10 LAN and 8 Neets extension devices, to connect to Central Control, Neets Project Designer as well as access to graphical user interface
    Power over Ethernet (PoE) IN to power the control system and PoE OUT to power an external device such as touch panel
    Email notification on lamp/filter hours and warnings
    1 NEB port (Neets Expansion Bus) to add up to 5 additional devices - choose between Keypad, Level Control or Port Expansion (serial and I/O)
    1 front USB port used for easy system configuration, uploading and downloading project files
    Built-in Infrared Learner at the front for easy IR code learning
    Can be mounted in trunking systems hidden from sight, or in the 1U Neets Rack Shelf
Bundle product no: 313-1006

Neets 10" Touch Panel
Part no: 313-0003

1280x800 resolution IPS panel with full viewing angle (brightness 350 nits).
150 Dpi

PoE support
Power over Ethernet (PoE), IEEE802.3af, 48V
Class 3 (up to 13 watt)
Note: PoE Injector not included.

Proximity sensor – For automatic display activation.
Ambient Light sensor – For automatic backlight dimming.

Touch Screen
Scratch resistant glass-on-glass touch screen.

RJ45 with POE – For both Power and Ethernet communication.
Micro USB (for FW upgrade only).

Design Templates
Use graphical templates or completely customize the GUI in Project Designer.

Fits standard 1-gang DK, EU or US back box - wall bracket included. Table mount is an accessory.

Control System compatibility
Compatible with Neets Control Systems SieRRa II, TanGo, AlFa II, DelTa and LiMa.

Neets Control - TanGo
Part no: 310-0305

Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing

RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block

IR learn:
IR Learn frequency 1 KHz to 150 KHz

Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block

Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block

Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP
Default gateway
Default subnet mask

PoE – Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices

Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)

IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A


Neets Project Designer
Neets Project Designer
Read more

Get Access to software

Please remember to login for access to the latest release of Neets Project Designer. If you do not have a Neets account, please fill out the form "Get Accesss".


-Ver. 3.23.1 (18-03-2019)
  • IR working support on Uniform Control System
  • UDP issues fixed
  • AMP 2:25, OFFDelay support upto 4 hours
  • Click Share more than 3 buttons fix
  • Quebec Pro HDMI changes not notified to script fixed
  • Echo Plus Memory Calculations fix
+Ver. 3.23.0 (16-01-2019)
+Ver. 3.22.2 (23-11-2018)
+Ver. 3.22.1 (18-10-2018)
+Ver. 3.22.0 (31-08-2018)
+Ver. 3.21.0 (01-06-2018)
+Ver. 3.20.1 (21-03-2018)
+Ver. 3.20.0 (23-02-2018)
+Ver. 3.12.1 (06-12-2017)
+Ver. 3.12.0 (16-10-2017)
+Ver. 3.11.3 (14-09-2017)
+Ver. 3.11.2 (27-06-2017)
+Ver. 3.11.1 (09-06-2017)
+Ver. 3.11.0 (28-04-2017)
+Ver. 3.10.0 (05-12-2016)
+Ver. 3.9.0 (31-10-2016)
+Ver. 3.8.5 (02-09-2016)
+Ver. 3.8.4 (17-06-2016)
+Ver. 3.8.3 (03-06-2016)
+Ver. 3.8.2 (01-06-2016)
+Ver. 3.8.1 (10-05-2016)
+Ver. 3.8.0 (27-04-2016)
+Ver. 3.7.0 (11-01-2016)
+Ver. 3.6.7 (06-11-2015)
+Ver. 3.6.6 (02-11-2015)
+Ver. 3.6.5 (28-10-2015)
+Ver. 3.6.4 (13-10-2015)
+Ver. 3.6.3 (13-08-2015)
+Ver. 3.6.2 (29-06-2015)
+Ver. 3.6.1 (29-06-2015)
+Ver. 3.6.0 (21-05-2015)
+Ver. 3.5.2 (20-04-2015)
+Ver. 3.5.1 (25-03-2015)
+Ver. 3.5.0 (16-03-2015)
+Ver. 3.4.4 (04-02-2015)
+Ver. 3.4.3 (04-02-2015)
+Ver. 3.4.2 (26-01-2015)
+Ver. 3.4.1 (13-01-2015)
+Ver. 3.4.0 (15-12-2014)
+Ver. 3.3.2 (14-11-2014)
+Ver. 3.3.1 (04-11-2014)
+Ver. 3.2.4 (17-09-2014)
+Ver. 3.2.3 (02-09-2014)
+Ver. 3.2.2 (17-07-2014)
+Ver. 3.2.1 (27-06-2014)
+Ver. 3.2.0 (20-06-2014)
+Ver. 3.1.0 (27-02-2014)
+Ver. 3.0.2 (16-01-2014)
+Ver. 3.0.1 (10-12-2013)

Forgot my password

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore loresed.