Professional, controllable and standalone audio device
Sound Bar with front-facing, full-range speakers that deliver top quality audio without requiring external amplification. The Neets Sound Bar – SB1 can be used as a standalone audio solution or integrated into Pro AV systems using a Neets or 3rd party control system with the RS232 port. When integrated, the sound bar can be controlled automatically or through a control interface such as a keypad or touch panel. 3 built-in DSP presets (Voice, Music and Presentation) customize the audio output according to the use scenario.
The Sound Bar has a built-in Class-D amplifier, which is highly energy efficient. Wake-on-signal functionality turns the sound bar on/off automatically when detecting an input. The sound bar can also be integrated in AV solutions with a control system, where its status can be switched by timer functions or motion detection.
Minimalistic design to match any interior
The Neets Sound Bar SB-1 has a minimalistic design that matches any type of architecture or interior design. The Sound Bar is available in five colors, with colored front covers made from Kvadrat wool. The Sound Bar can be mounted on the wall, TV stand or placed on a flat surface.
Sound Engine A DSP processor with 3 built-in presets (Music, Voice and Presentation) provides sharp audio in different room settings.
Integrations Professional sound bar that provides the connectivity required in a professional environment. Integrates with AV control systems using a serial RS-232 port.
Energy Efficiency Wake-on-signal functionality, control system integration and class-D amplifiers make the sound bar an energy-efficient option for meeting rooms.
Speaker Configuration Full-range, front-facing speakers with 2.0 stereo configuration (2 x 4” full-tone woofers and 2 x 1” tweeters).
Inputs The sound bar has dedicated balanced, unbalanced and digital inputs used to integrate the sound bar in professional audio solutions.
Placement options The sound bar can be wall-mounted with the included wall brackets, mounted on a cart or stand or placed on a flat surface using the included rubber feet.
Color options The sound bar is available with front cover in classic black or 4 additional colors (black, grey, red, blue, green). The coloured covers are made of 100% wool from the luxury textile manufacturer Kvadrat.
Audio output Output power 4 x 20 Wrms THD+N < 0.1 % @ 1 W Woofer 2 x 4” dual magnet, sandwich membrane w/rubber surround Tweeter 2 x 1” soft dome Frequency Response: 50 Hz - 20 kHz +/- 3 dB Maximum SPL: 106 dB SPL @ 1m
Unbalanced audio input 1 x stereo input Input impedance: < 100 k Ohm Wake on signal: Yes Connector: 2 RCA female
Balanced audio input 1 x stereo input Input impedance: < 100 k Ohm Connector: 1 x 5 pin screw block
Digital audio input Interface standard: IEC 60958 AC-3, DTS decoding not supported Bit depth: 16/24 bit Sample rate: 32/44.1/48/96/192 kHz Wake on signal: Yes Connector: 1 TOSLINK female
On/Off Auto On/Off: Yes Wake on signal: Yes
RS-232 Ports: 1 x bidirectional Baud rate:19200 bit/sec Data bits: 8 Parity: None Stop bits: 1 Connector: 1 x 3 pin screw block
Power input Input voltage: 24 VDC Max power usage: 50 W Standby power usage: < 0.5 W Connector: 5,5 mm DC plug
Power adaptor Line voltage:100 VAC – 240 VAC Line frequency: 50 Hz – 60 Hz Output voltage: 24V Max output current: 2.5A
Power indicator Power LEDs behind front grill
General Enclosure: Wood (MDF) Enclosure finish: Matte black vinyl Front grill: Textile covered MDF Width:1018 mm / 40.1 inch Depth: 75 mm / 2.95 inch w. wall bracket: 81mm / 3.18 inch Height:130 mm / 5.1 inch Weight 4.5 Kg
Shipping Width: 1120 mm / 44.1 inch Depth: 150 mm / 5.9 Inch Height: 200 mm / 7.8 Inch Weight: 6.5 Kg Storage temp. : -20 °C to 50 °C Storage moisture: Non condensing